Products - Concord Elevators and Lifts - Handilift EN

Handilift EN Features and Benefits

Cab Size and Construction
35" x 54" (890 mm x 1372 mm) or 35" x 48" (890 mm x 1220 mm) clear platform size. The cab is constructed of an aluminum extruded frame with steel inserts and the gates/doors and enclosure walls are aluminum extruded frame with plexiglass or steel inserts.

Emergency Alarm Button
Passenger safety and peace of mind.

Lower Landing Entrance and side walls extend 42 1/4" (1073 mm) above the top floor landing
Passenger safety and prevents access to the underside of the platform.

Full height lower landing door with a Pal Lock, Hydraulic Closer, Aluminum Pull Handle and Push Plate
Electro-mechanical interlock (Pal Lock) prevents movement of the lift if the door is not closed and locked.

Elevator Guide Rails
Ensure stability and ride quality.

Self Lubricating Acme Screw
The Acme screw drive system is self-lubricated by an adjustable oil application system providing long life and reliable operation.

Manual Lowering
In the event of a main power failure, the top of the Acme screw is accessible and equipped so that the screw can be turned using a special optional hand crank to lower the platform.

Handrail
Mounted on the control wall to provide added safety.

Solid State Electronics
Reliability

Large Illuminated Control Buttons
Easy to operate.

Finish
Each part of the cab and components are individually painted in Architectural White electrostatically applied baked polyester powder coat paint.